SurfaPore R آب گریز کننده نانو سطوح خاک رس ، شیروانی های سفالی و سفال
تومان 980,000
SurfaPore R آب گریز کننده نانو سطوح خاک رس ، شیروانی های سفالی و سفال
Nanotechnology for clay based surfaces such as roof tiles, cotto and pottery.
SurfaPore R protects your clay surfaces against water and ageing while it preserves the aesthetics. After applying SurfaPore R, your roof tiles and pottery repel water and remain dry even after rain. By excluding water, you protect your favourite clay based surfaces from “greening” of mould growth and cracking, due to frost.
GENERAL CHARACTERISTICS
SurfaPore R is a water based emulsion, composed of nanoparticles, possessing three molecular regions: (a) the core nano-sized particles, suitably engineered to fit into the pores of a clay-based surface, (b) the hydrophobic moiety, attached on top of the core nanosized particles, responsible for the creation of a continuous hydrophobic layer that covers all the clay product’s pores, capillaries and free surface and (c) the binding moiety, responsible for anchoring the nano-particle directly onto the clay surfaces. In contrast to traditional sealers that cover the surface with polymerizing additives, SurfaPore R dresses the pores, the capillaries and the “free” surface of clay based products with hydrophobic materials. Instead of covering your favourite rooftiles, let them breath protected. Pores still exist, capillaries are still effective channels of humidity and air transportation, but the liquid water droplets cannot touch your clay surface thus preventing frost threat, mould growth, efflorescence and white spots development.
APPLICATION SURFACES
Roof tiles, Pottery, Absorptive cotto tiles
APPLICATION NOTES
Surface Application: The application surface should be dry and clean. Apply SurfaPore R with a brush, a roller or spray gun. No dilution is required. On very absorptive surfaces re-apply within 3 hours.
Dipping: Dip the clay based surface in SurfaPore R for 30 seconds. In any case (surface application or dipping) test results on a small area before full scale application. Maximum water repellency is achieved 24 hours post application.
Consumption: Estimated consumption rate 9-11 m²/L, strongly dependant on the properties of the surface applied
محصولات مشابه : آب گریز کننده و درزگیر — SurfaPore T
محصولات مرتبط
اسکوپ سنگ -طرح پروانه ای
تمیز نگهدارنده سطوح Surfashield C
Surfashield C توانایی برطرف کردن لکه های آلی و آلودگی، جلوگیری از رشد و تکثیر میکروب ها و باکتری ها، تمیزکننده هوا وبوگیری سطوح خارجی متخلخل.
مثل سیمان، گچ، سنگ مرمر صیقل داده نشده، آجر و ... اجرا کرد. این محصول با جدب نور محیط خاصیت خود تمیز شوندگی و استرلیزه کردن پیدا می کند. خواص این محصول به علت پیوند های شیمیایی که با سطح ایجاد می کند دائمی می باشد.
درزگیر ساختمانی پلی اورتان-s5-سفید
درزگیر سیلیکون S1 -آنتی UV و آنتی باکتریال -ساخت اروپا -شفاف
عایق محافظ (بی رنگ) روی چوب
مزایا :
مقاومت بسیار بالا در برابر آب :
استفاده از این عایق ، چوب را به محصولی ضد آب و قابل شستشو تبدیل می کند بطوریکه می توان از آن در ساختار داخلی سونا، حاشیه استخرها و حتی سازه های چوبی داخل قایقها استفاده کرد.
مقاومت عالی در برابر اشعه UV :
مقاومت منحصر به فرد این رنگ در برابر اشعه UV خورشید به گونه ای است که می توان دریچه ای جدید به نام استفاده از چوب در نمای ساختمان و محیط های باز گشود. تاثیرات مخرب اشعه UV همواره ما را برای استفاده از چوب در فضا های باز و نمای ساختمان دچار تردید می کرد، اما امروز به لطف وجود مقاومت فوق العاده محصولات دیوترول در برابر اشعه UV ما می توانیم به بسیاری از آرزوهای خود دستیابی پیدا کنیم.
مقاومت کامل دربرابر میکروارگانیسم ها :
این رنگ آنتی باکتریال است و از رشد هرنوع میکروارگانیسمی درسطح چوب جلوگیری می کند.
کاملا بدون بو :
این محصولات کاملا بدون بو هستند و سرعت خشک شدن مناسبی دارند بنابراین در محیطهای بسته نیز مورد استفاده قرار میگیرند.
عایق-محافظ-بی-رنگ-چوب

نقد و بررسیها
هنوز بررسیای ثبت نشده است.